Is A Road Tubeless System Right For You?

Is A Road Tubeless System Right For You?

Written by Contender Bicycles, on June 01, 2023

Part of what makes cycling fun is the constant stream of tech and innovation making its way to our bikes. Whether one chooses to embrace all that is new, prefers to keep things simple and classic, or something in between, everything that comes down the pipe tends to find its way into the discussion. It’s fascinating to see what has hit the scene over the years and equally as interesting to look at what has stood the test of time and remained largely unchanged. Wherever you fall on the tech-spectrum, it’s a great time to be a cyclist!

In today’s road cycling community, there seems to be a “holy trinity” of tech topics that often transcend the exchange of opinions and move straight into wildly gesticulating, “colorful” discussions. These tend to be electronic shifting, disc brakes, and perhaps the reigning champion of them all, road tubeless. 

Is A Road Tubeless System Right For You?

While somewhat polarizing, road tubeless is becoming more common and more manufacturers are jumping on board and investing. We’ll break down the what, why, how and what to expect. Even if you’re not ready to ditch (the last of) your tubes yet, read on to get the info you need to make the call…

*Before we jump in, it’s worth noting the confusion that periodically pops up during the road tubeless discussion regarding *tubular* tires. A completely different animal, tubulars (or “sew-ups” if you’ve been around for a few years) have been a fixture in the cycling world since the dawn of time, and remain widely used in the professional road and cyclocross ranks. There are good reasons for pros to use tubulars, and why they often prefer them, but for those of us who purchase, mount and maintain our own tires, gluing tires to proprietary rims and not being able to easily deal with flat tires out on the road doesn’t make much sense. Therefore, we’ll leave tubular tires for another time.

The What

Just like with most MTB’s, gravel bike setups, automobiles and many motorcycles, “tubeless” just refers to removing the inner tube aspect of the wheel/tire system. A tubeless-ready tire, rim and tubeless valve are all required for the setup, along with special tubeless specific tape around the inside of the rim to seal the valve holes (there are a few rim designs out there that use a sealed inner rim, with the spoke holes threaded into the outer rim, thus not requiring sealing tape).

Is A Road Tubeless System Right For You?

Just like the tubeless standard that has been the norm in the MTB world for 20 years, a road tubeless system relies on liquid sealant. Once the tire is inflated and properly seated, the air pressure within the tire causes the sealant to fill any micro-perforations in the sidewall, seal the rim to tire interface and quickly seal punctures that may occur out on the road. Completely set up and rolling, visually and aesthetically you’d never know the difference between a tube and tubeless system. (ok, maybe if you zero in on the valve…)

The Why

Many of the benefits of and reasons for a tubeless road setup carry over from the off-road and all-road worlds. Primary among the benefits of road tubeless is puncture resistance. Pinch flat resistance is also improved, but not to the degree that it is on an MTB or gravel given that the ground covered on a road bike generally isn’t as rough as when you’re on the trail. 

Tubeless systems can offer lower rolling resistance and potential weight savings over a tube system due to the rotational weight and friction of a tube being removed from the equation. The amount of sealant required generally weighs less than an average tube.

Perhaps the most discussed aspect of tubeless road systems is that of tire pressure. Riders often use more than the ideal tire pressure in the interest of preventing pinch flats, only to suffer from a harsh ride and diminished tire contact with the road. Getting bounced around on the road in addition to losing traction due to too much psi is simply no fun. While many quickly cite the ability to use lower tire pressure with a tubeless system, a better way to frame it is you have more latitude to determine and run the appropriate tire pressure for you and your ride. Due to the absence of an inner tube, a tubeless system allows for a wider range of pressure on the low end due to the decreased likelihood of a pinch flat. This allows the rider to work with a much lower pressure in determining the ideal range for their tire size, terrain and rider type and rider weight. Finding the ideal tire pressure will deliver more comfort and control, decrease rolling resistance and can ultimately provide a better ride. 

Another element to consider when you eliminate inner tubes, is that you’re eliminating inner tubes. While it’s best practice to still carry a tube in case of a flat (or someone else having a flat), being able to keep tubes out of landfills is good for everyone. It’s true that tubeless sealant is still ultimately a waste product, but the overall impact pales in comparison. 

The How

Probably the hottest of the hot buttons when it comes to the road tubeless discussion is the actual set up. Fixing a flat tire by swapping out the inner tube is arguably one of the easiest, most straightforward service tasks one can perform on a road bike. It’s a must-know for a proficient cyclist and modern tools and tech have made it easy for everyone. Setting up a tubeless road tire and wheel is definitely more involved and time consuming, but once it’s done it’s largely done for a good long while. 

The crux of a road tubeless set up has long been the initial mounting of the tire on the rim. In years past, simply getting both tire beads on to the rim was known to bring hardened mechanics to tears, and the number of broken tire levers would outweigh the environmental offset of saving tubes from landfills. But as technology, design and materials have improved, the mounting process has gotten far easier and different manufacturer’s tires and rims mate up far easier. 

Is A Road Tubeless System Right For You?

One does need to adopt a different technique and mindset when setting up a tubeless tire however. Tubeless rims are designed with a channel in the center of the rim that needs to be employed when mounting the tire. The center channel effectively reduces the diameter of the rim. When one side of the tire’s bead is slipped over the rim and pushed down into the channel, this allows room at the outer edge of the rim for the tire bead to clear over the rim. Once the tire is on the rim it can most often be seated with a hand pump, given the relatively small air volume (compared to an MTB setup which often requires a compressor or large volume pump). 

When the tire is properly seated, sealant is injected into the tire via the valve stem, the tire is inflated and it’s essentially ready to go. Some manufacturers recommend a ride immediately after setup to help the sealant uniformly absorb into the micro fissures of the tire and any air gaps that might be present. It’s a good idea to top off the sealant after the initial setup and break in ride, and like any tire it’s good practice to check and adjust tire pressure before every ride. Just like with the MTB tubeless systems, it’s also good to periodically check the level of the sealant and top off when necessary according to the manufacturer’s recommendations. Once a tubeless wheel is properly set up and running, you can usually count on full seasons of trouble free riding (I logged over 26 months of flat-free road riding at one point). 

Dealing with the infrequent roadside flat tire is a valid consideration when discussing road tubeless systems, but like with the initial setup, if you know the technique for divorcing the beads and getting them in the center channel, a tubeless setup is no more trouble to deal with than an inner tube setup. The sealant is an added element and it can be messy to deal with out on the road. But many find it to be not much more than a nuisance, just like with the MTB setups we’ve accepted for two decades.  

Is it for you?

So why the polarization surrounding road tubeless? As with anything new introduced into a sport as deeply steeped in tradition as cycling, something as fundamental as where the rubber meets the road is not going to change or gain acceptance overnight. Inner tubes have been providing the tire/wheel interface on bicycles since the late 19th century. On one hand, it can be argued that traditional tube setups are a reliable, sound and time tested standard that still work fine. On the other hand, “we've been doing this for over 120 years??” 

Is A Road Tubeless System Right For You?

While tube setups aren’t technically “broken” and in need of a “fix”, there some serious positives with road tubeless that outweigh the negatives for many riders out there, myself included. I’ve found the pros to far outweigh the cons and love the added comfort and control my tubeless wheels provide. Not having to worry as much about flat tires and trying to recycle tubes are huge pluses for me as well. The “conversion” didn’t happen overnight for me either. I had some….questionable experiences with road tubeless early on, just like I did with my first tubeless MTB setup in 1999 (Vive le CrossMax UST du Mavic!), but as with disc brakes and electronic shifting, I’m sold and I look forward to what else the future will bring!

There's much more to discuss about road tubeless than we've covered here (hooked rim vs hookless, tire width, etc), so let us know if you have questions, or would like recommendations. We're always happy to discuss!

Is A Road Tubeless System Right For You?

 


6 comments

  • My experience with tubeless tires was not very rewarding. the sealant only protect you from minor punctures . I have two flats when the puncture was larger and immediately loss all the sealant. It was impossible for me to remove the tire and insert a tube. I was stranded for several hours until my partner showed up to give me a ride home. I gave up the tubeless approach and went back to the tube. Today we are influenced by “new technology” and I am sure some of you will swear that tubeless are better than white bread. Personally I disagree. Happy riding boys and girls.

    Julio Garreaud on

Leave a comment

Please note, comments must be approved before they are published